Material List for Hands on Apparatus Workshop on Arduino

These workshops are regularly conducted by our expert international robotics faculties. If you want to arrange one workshop like this, then contact us immediately to book the date.

To do the practical experiments in our hands-on apparatus workshop of Arduino, you have to purchase the following material from the local market and be ready with it so that you will be able to perform all practical experiments given in the workshop.

If you are not being able to get the complete material from your local market then Vidyasagar Academy can also provide you the complete kit at a reasonable price.

Please read details and specifications of each and every device or component required in the kit as given below.

If you want to purchase the complete kit, then you can contact us at this link.

Click the images below to expand and read titles.

Arduino UNO (preferably R3, but other will also do)

IR sensor

Ultrasonic Sensor

Small DC Buzzer

Servo motor SG-90 Tower Pro

Normal size breadboard

Male-male jumper wires

Male-female jumper wires

1k ohm, 1/4 watt resistor

100 ohm 1W resistor

Red LEDs 5mm type

Micro switch (push-to-on type, mountable on breadboard)

LED Display (FND 500 common cathode type)

Arduino UNO USB-B to USB data cable

1. Arduino UNO (preferably R3, but other will also do) – 1
2. IR sensor – 1
3. Ultrasonic Sensor (HC SR 04) – 1
4. Small DC Buzzer – 1
5. Servo motor SG-90 Tower Pro or equivalent – 1
6. Normal size breadboard – 1
7. Male-male jumper wires – 20
8. Male-female jumper wires – 6
9. Small jumper wires (can be made using hookup wires) – 5
10. 1k ohm, 1/4 watt resistors – 5
11. 100 ohm 1W resistor – 1
12. Red LEDs 5mm type – 5
13. Micro switch (push-to-on type, mountable on breadboard) – 1
14. LED Display (FND 500 common cathode type) – 1
15. Arduino UNO USB-B to USB data cable – 1
16. PC or Laptop with Windows 10/11 installed – 1
17. Copybook, pencil, eraser and pen (to jot down some instructions) -1 each